|
Tractor Talk Discussion Board |
Re: snow removal
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Unimog on July 24, 2001 at 19:44:47 from (152.163.195.187):
In Reply to: snow removal posted by Jim in NH on July 24, 2001 at 18:21:50:
Jim, I think the snowblower is out due to the
crushed stone surface, too hard on the blower and
anyone in the area. You can mount a PTO blower on
the front with a gearbox and shafts but you would
lose the PTO for your salt spreader. There are
hydraulic run blowers but I don't think your pump
on the 584 is heavy enough. I would get some lugs
welded in your present bucket and mount the plow
in the bucket. This would give you the option of
plowing or piling the snow by just removing a few
pins. I do this at my place and it works great.
You will need the chains and extra weight on the
rear but the sander should help there. Chains on
the front wheels do not help much in my opinion.
Make sure your plowblade is wide enough to clear
the rear wheels when it is angled, mine is 9 feet.
There are blades for sale in The Want ADvertiser
in your area, you can buy it at convenience stores Unimog
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Weldin Basics, Part 3 - by Curtis von Fange. Oxy-acetylene Welding - Part One In our series on welding we have taken a brief look at AC and DC arc welding along with basic techniques and safety equipment required for safe usage. Since our premise is to cover welding types that might best be used on a farm environment we have kept our overview purposefully simple and general. The second type of welding that this observer finds quite useful in
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
