Posted by MarkB_MI on December 06, 2018 at 03:02:42 from (174.230.22.40):
In Reply to: OT: Building A Shed posted by Ken Christopherson on December 05, 2018 at 17:37:52:
Fuhgetabout using recycled materials. Unless somebody gives you a load of clean used 2x4s and plywood, the money you save won't come close to making it worth your while. Ever tried to dismantle a pallet without destroying it? You might chance into some used trusses, doors or windows, but I wouldn't bet on it.
I would go 10x12. You can build 2 foot deep shelves across the rear and still have a 10 foot square area. Items like the snowblower can be parked under the shelves. If you use rafters rather than trusses, the greater width will give you some "attic space" to store rarely-used items.
What's the downside of pulling a permit? Will they require you to pour a concrete pad or ratwalls? While we're on that subject, what kind of floor do you want? Concrete, dirt, or plywood on joists? I've built one shed with a plywood floor and another with concrete, and concrete is the way to go. Woodchucks luv the wood-floored shed sitting on blocks.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Grain Threshing in the Early 40's - by Pat Browning. The setting is rural Wisconsin, halfway between East Troy and Elkhorn, on Hodunk Road, our nation was at war, and I was 6, 7 and 8 years old. George was our "threshing neighbor." He was the one with the threshing machine, a JI Case on steel wheels, and he pulled it to our farm with a JI Case standard tractor also on steel. In those days, steel wheeled implements were common. The roads were general gravel, so the lugs cutting into them wasn't a problem. George would set up the thresher, s
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
