Re: Hydraulic motor

Posted by Wardner on June 11, 2007 at 16:54:04 from (4.154.242.251):

In Reply to: Re: Hydraulic motor posted by Janicholson on June 11, 2007 at 15:14:38:

I was able to find the displacement data buried in a Char-lynn service bulletin. The two winch motors have the same displacement. And I lucked out. They have 20% of the displacement of the motor that I took from the shelf. They are capable of 700 RPM max speed. I now have my 400 rpm. Here's hoping they have enough torque at 57 ft lbs.

Forget the H. I am putting the IH balanced head mower on my forklift. Weird huh? I have four hundred feet of eight foot high mulbury hedge. It is about eight feet wide as well. It takes all day to clip it. I should be able to do it in half an hour.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]