Posted by FLOLDFORD on August 15, 2018 at 17:09:29 from (47.205.109.134):
In Reply to: Re: A visit with Fifi. posted by Billy Shafer on August 15, 2018 at 16:55:08:
Billy I've got a lot of bootleg hours in old aircraft. About 20 in a Stearman with a 450 PW in it and around 10 or so in a AT 6 and a few hours in the right seat of a Twin Beach The best was the hour I spent in a two place Mustang back 20 years ago. I've been away from aviation for quite a few years but I would love to get back in it but the cost is like you said more than my budget will allow. I've had the pleasure of flying with one of the best air show pilots in the US over the years and he's still a good friend of mine. If you get time Google a fellow by the name of Elliot Cross. He taught me more about flying than any pilot I ever met. He taught me that just about any aircraft could be rolled as long as you maintain positive G's. He made me a believer in that one evening when he rolled a Grumman Goose with 4 of us sitting in the back! And by the way he showed me how to ski a Stearman across a lake.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
