Posted by Galen Houk on June 09, 2018 at 11:58:44 from (173.22.172.123):
In Reply to: ok boss posted by jon f mn on June 08, 2018 at 18:22:08:
I know just how you feel. I do the same thing a lot with a drop deck hauling for an auction company. Many, many tight spots. Backing up a mile is common. Went through a couple woods like that. I told the boss it might damage the mirrors and paint but I plowed through. There were 3" diameter limbs on the trailer after I went through. Had to drive across the end of a corn field to get out, got stuck, but pulled it out with a 4x4 truck. Took pictures of the corn and gave them to the boss to asses the damage incase the owner asks for compensation. Hauled out of a very tight site with a couple of other semis. Waited for one to come out and finally gave up and headed in. Met him half way and had to back out through the curves and onto a T road. That was with a long wheelbase twin screw and a 53' flatbed. It is surprising what you can do when you have to. I have rubbed a few gate posts and missed a street light by about an inch.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The River Tractor - by Charlie English Jr.. This is a 4010 John Deere that was used to farm on the Diamond Island which is in the Ohio River about 15 miles southwest of Evansville, Indiana. About ten years ago, this tractor was parked close to the bank as the river was washing the bank of the island away.
... [Read Article]
Latest Ad:
Wanted to buy model 65 massey ferguson 65 diesel
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
