Posted by jcronk on June 02, 2018 at 11:03:46 from (64.201.205.34):
In Reply to: FARMALL H Carb posted by jcronk on June 01, 2018 at 05:04:02:
Yeah, this one has been opened before. Current owners picked it up in the 1960's. It had been given a quick spray of red paint to make it look pretty. I have encountered a number of "fixes" that do make your head shake. They have all been overcome and the carb is the last mini-project of the overall project. Tractor hasn't seen use for years. Owner says he has always had troubles with the carb and the starter. But it did have shiny paint for a while. As for old versus new, the old always seems more substantial. I would have preferred to keep old choke but the shaft is worn and that along with the worn bushing makes it looser than I would like. The old choke plate is anchored to the shaft in a superior fashion to the new set up. Also, the old throttle plate is more solid than the new. Anyway, the idle jet must really be in there. Heat and penetrating oil and small needle nose pliers have not budged it. I'm looking at getting a set of small screw extractors in case I have a similar problem to the future. A guy could always buy a new carb but that's no fun. Cheers, Jack
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: 1929 McCormick-Deering 10-20 - by Randal Simmon. On July 4th 1998 my dad and I was sitting on the front porch when he said that he was going to sell his two 10-20's to a junk man. He said that the junk man was going to give him $500 for both of them but he hadn't received the money for them yet. So I went into the house and wrote him a check for $500 and bought them myself and said now they are mine. He had bought them about five years before thinking that he was going to restore them himself. After five years sitting in the barn, he changed h
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
