Posted by Bryce Frazier on May 14, 2018 at 19:46:51 from (67.143.192.97):
A lot of you guys have asked me several times how the Duramax Dually project has come along since I started on it about 1 1/2 years ago. Well, here are some pictures!
Dads 73 Z-28 going to a car show this coming weekend. I am hauling it into town tomorrow morning, thus giving him 4 days to "wash" it. . . :)
Hauling Fertilizer this spring, rolled the scales with a hair over 5000lbs of goodies in the bed!
Pulling our work trailer (I install carpet / flooring for those that don't know) on a day when the boss had his plow on his Duramax.
And then speak of the devil the bosses 05 LLY with the plow!
And then last but not least, this was the first trip I made with the 20' Fox trailer after I redid it, including wiring, LED Lights, New wheels and tires, paint, and a nice deck.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.