I just had a sending unit go out in one of mine. The OEM price was $130 + shipping and handling + wait for it. ebay had a unit for $21 free shipping in 3 days.
I found that there are several types of units out there: One is 0-90 ohms and the other resistance reading that's popular is 33-256 (or thereabouts). Then there is there is full at miniumum or maximum resistance differences.
The tractor was made in S. Korea and the device I bought was made for a '65ish domestic Chevy and I liked that idea as I expected and got one that had a very heavy duty resistance scale and wiper arm contact....ought to last the life of the tractor.
The tractor required F at 0 ohms and E at 90-100.
The unit was made for F at max resistance so I just turned the resistive sending unit upside down...easily done with the two mounting screws....
The arm on the unit was adjustable from 6-24 inches. Cut to fit....my tank is 12".
Noticed that the Mounting hole for the replacement was SAE 5 patern/dimension and the OEM was something else in metrics, same patern but slightly larger diameter mounting hole pattern . Swapping flanges solved that problem.
The dimensions for SAE 5 tank floats are published online, just ask www and you can measure yours to see if it fits since yours doesn't lend itself to what I did to fit the mounting points.
Actually enjoyed the experience. Better spent $21 than had I decided to go to a movie.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - On the Road with Dave Gohl: Auction Musings - by Dave Gohl. I was thinking the other day about all the auctions I've been to in the last few years. There've been many. Some have been very good, some have been well, disappointing to say the least. But no matter how good or bad auctions may be, we always seem to stay until the item we've come for or are interested in is on the block. I've been to some auctions near and far. I think the furthest has been the Two Cylinder 7 in the Amana Colonies last year. Lots of stuff, lots of people. I've also atten
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
