Posted by Destroked 450 on February 04, 2018 at 07:52:55 from (173.242.142.14):
In Reply to: Corn Snapper posted by NH8260 on February 03, 2018 at 22:57:41:
Ford 601-602 mounted pickers were some of the best pickers make, the snapping rolls are at an angle so that as soon as the ear was snapped off it would drop into the first elevator taking it up to the husking bed or cross conveyor.
On pickers with flat snapping rolls the ear are being shelled as they travel up the rolls.
Down side to mounted pickers is they're a pain to hookup and the tractor is dedicated until your done picking.
We have 2 601's, one with husking bed, one without.
We pick corn on the ear and grind it for cattle feed in our Gehl 95 grinder mixer .
If our operation was big enough that we would need a two row machine I'd look at a John Deere 300 with a stripper plate head.
Most of what shells off in my 601's goes into the wagon anyway but this year I'm going to talk to my seed dealer about a more picker friendly variety.
Dump wagons work better for ear corn than gravity beds.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.