Posted by Adirondack case guy on January 31, 2018 at 08:44:43 from (69.207.198.19):
In Reply to: Re: Case IH 2294 posted by Janicholson on January 31, 2018 at 07:36:36:
Allen's IH tractor and the 2294 are totally different animals. The 2294 is a totally Case built tractor, and Allan's 88 series was a 100% IH tractor. The 2294 had a Case Power Shift trans, Case 504 engine, and a Corello front end. Case did have a factory sponsored rear end up date on the 20- 2290s, but all the updates were incorporated by the time the 2294s came out. The 2294s ran very strong, well over rated HP so the rear end rebuild was in order for the hrs. it had on it. As far as things to look for, would be any sign of antifreeze in the oil pan, make sure the shifts are crisp and precise, with no hesitation or engine drag between shifts. This tractor has electronic shift control over hydraulics, and there are micro switches, wire connections, and solenoids that can be issues at times. You should take a look at the PTO and be sure it shuts off. As I said, the 22s ran strong and had a 540-1000rpm PTO in them,so the clutches there could have be taxed as well. Loren
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
