Posted by MarkB_MI on January 22, 2018 at 07:19:25 from (198.208.159.18):
In Reply to: box blade for snow? posted by Ray Tractor on January 22, 2018 at 04:34:25:
I used a lightweight back blade for many years to clear our driveway. It worked OK, but a few years ago we got very heavy snow and I knew the back blade wasn't going to work. So I mounted my box scraper and used it all winter long. It had the necessary weight to handle the heavy snow. The only problem I had was I kept throwing tire chains from pushing in reverse so much; putting a pair of bungee cords on each chain fixed that.
The next year I bought a heavy-duty Woods blade with offset and that's what I've used ever since. If you already have a box scraper, I wouldn't waste money on a light-duty rear blade. If you buy a rear blade, make sure it's heavy and preferably has an offset adjustment. Mine also has skid shoes. It set me back around $1800.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Reflections of the Fifties - by "Country" Elliott. I remember rowing up in the 1950�s in a small, rural town in northwestern New Jersey. The closest town to ours was only 3 miles away, and there were seven dairy farms in the areas of these two country towns. We had 5 acres, and because my Dad was a salesman and not a dairy farmer, he let the Bockovens, who owned the Willow Tree Dairy farm most of our land.
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
