Posted by kcm.MN on November 26, 2017 at 09:45:20 from (174.219.4.53):
In Reply to: deer stand posted by stonerock on November 26, 2017 at 06:38:55:
Quoting Removed, click Modern View to see
This doesn't make sense to me. Anything I find on my property that isn't supposed to be there is up to my disposal. That said, I would remove it ONLY if currently unoccupied. I don't normally carry a gun with me, and would rather not use one even as a means of last resort, so if I ever saw anyone armed on my place, I'd call the Sheriff's Dept and then do a little photo-documenting while waiting for them to get out here.
Fortunately, now I have enough cameras out and about that I don't have to risk my personal safety trying to document anyone. There are VERY few spots on my property that cannot be seen by at least one camera, and someone would still get caught on camera getting to those spots.
One year I was standing on a minimum maintenance road talking with someone. I had a pair of binoculars and looked down the road as I thought I saw something far, far away. It was another hunter, not actively hunting as this person had NO orange on.....yet he was carrying a rifle. As I watched him, he raised his rifle and watched me as well. That wasn't cool!! It's an unsettling feeling having some stranger during rifle season glassing you down through their scope, especially when they weren't even legal to be hunting! That was one of two very crazy years for deer hunters around here; groups of people trying to flush out deer while someone on the roadway would drive back and forth waiting, using 2-way radios when they were not allowed (they are allowed now), trespassing, and even shooting a deer out the window of a moving vehicle!!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Ferguson TO-20 - by Staff. When the infamous "Handshake Agreement" between Henry Ford and Harry Ferguson fell by the wayside (that's a story in itself), Harry Ferguson quickly set up manufacturing plants for a United States version of his English TE-20. The TO-20 was relatively the same as the TE-20 except utilized some different casting materials and had a US-style electrical system. The TO-20 was a dead ringer for the Ford 9N and 2N models and they say that Ferguson did this on purpose when the Handshake Agreement wen
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
