Had the truck in for professional tune-up a couple years back. Only use it to plow snow on our property, so definitely no abuse. Engine starts and runs so long as I give it gas, but will immediately die if I let off the gas even most of the way, until it warms up a little. Today it was right at 32F and I hooked up the plow. Brand new battery cranks the engine with power to spare. Once engine is warm, everything is fine. Doesn't even have to register on the water temp - just needs to warm up somewhat.
Can't take it back to the mechanic, as we were his last more in-depth job. When we got back from Dad passing away (cancer), we found out he had cancer also. He wasn't very old, either! Truck started fine then, but it was Summer. Just three months later, when the truck wasn't starting well, I called but got no answer. Soon after that we saw that his shop was closed up. About a year later we found out he had also passed away shortly after closing shop.
Great guy! Would help out "anyone", charged less than anyone else, but took great pride in his work. Used to race cars until accidents and orders from "The Boss" (his wife) made him stop. The mechanic before him.....well, that's why I left the truck with Steve for 3 months, to fix the other guy's scab work.
...I've kinda got this personal beef with cancer. It took Steve too(!!) young - left a wife and two beautiful little girls. Took Dad. Seems to have taken Dick2. Just thankful that Larry is fighting back as well as he is. Those last pics of him fishing -- just awesome! Not to mention all the others here who have or are still fighting with it!
Hmm...seems I've got more than just the truck on my mind tonight.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Grain Threshing in the Early 40's - by Pat Browning. The setting is rural Wisconsin, halfway between East Troy and Elkhorn, on Hodunk Road, our nation was at war, and I was 6, 7 and 8 years old. George was our "threshing neighbor." He was the one with the threshing machine, a JI Case on steel wheels, and he pulled it to our farm with a JI Case standard tractor also on steel. In those days, steel wheeled implements were common. The roads were general gravel, so the lugs cutting into them wasn't a problem. George would set up the thresher, s
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
