Re: radara4077

Posted by flcracker25 on October 26, 2017 at 06:37:26 from (216.173.170.178):

In Reply to: Re: radara4077 posted by radara4077 on October 26, 2017 at 05:50:22:

If you were to build one again, would you use this method or go with a more complex PTO run mill using gears and a 90 degree gear box, etc.?

Regarding the wear and tare-if you were to always run it at a lower RPM do you think there would be any/much? We have a mill in that's in good condition, want to turn it into a power mill, but don't want to do so in a way that will damage it, etc.

Thanks.

Replies:

Add a Reply! You must be Logged In to Post Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks. No political comments, hate speech or bigotry of any kind will be tolerated. Violations will be removed and posting privileges may be permanently revoked without notice.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial No List  Return to Post  Upload Photos/Videos Choose Files from your local computer Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]