Just wanted to post something on the flip side to all the horror stories. My BIL "lent" me his brush hog years ago. I offered to buy it from him as he then got a finish mower and then later a zero-turn. He said no to me every time I brought it up. just laughed and said "just think of it as you're storing it for me". Anyway, last year he needed to clear some brush along a creek and he borrowed my DR Brush Mower. Brought it back a couple of weeks later. I started using it and after a while the chain started popping off. Took a look and the sprockets were not in line. Something looked different, didn't realize what it was but I adjusted them quite a bit and everything was fine. Next time I saw him I mentioned it, kidding him that he "broke" my brush mower. He laughed and said "how did you know?" Turns out that he DID bust it and took it into the dealer for repair. I told him that I could probably have fixed it for a lot less than what the dealer charged him and what did I owe him. His response was "I borrowed it, I broke it, I fixed it. It is none of your concern how much I paid". He's the only guy that I'll lend to. BTW, still keep trying to buy that brush mower from him that I use regularly and his answer is the same "no, keep your money".
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
