Posted by BarnyardEngineering on September 06, 2017 at 06:07:17 from (40.141.236.246):
In Reply to: The Time Has Come. posted by Adirondack case guy on September 05, 2017 at 16:09:03:
Here is a question that has perplexed me for a very long time:
HOW DO YOU KNOW YOU DON'T WANT TO READ IT UNLESS YOU READ IT???
So many say, "If you don't want to read it, don't read it," as the solution to OT posts. That's all well and good if the poster adheres to the convention of putting OT in the subject header and/or comes up with a well-written descriptive subject.
90% of the time the subject is misleading or non-descriptive (i.e. "HELP"), so you don't know what's in the post until you read it. By then it is too late. You can't un-read something and get your time back. I can see why this frustrates people.
Of course having a separate forum for it is not the solution. If someone can't follow the simple conventions of putting OT in the subject and coming up with a descriptive subject, what makes you think that they will put it in the right forum?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Looking for a minneapolis moline zts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.