Posted by Eldon (WA) on June 04, 2017 at 21:36:00 from (67.185.46.116):
In Reply to: Bush Hog Vs Flail posted by Eldon (WA) on June 04, 2017 at 15:51:36:
Quoting Removed, click Modern View to see
I started out with the Landpride 6' and would put about 400 hours on them, sell and buy a new one. That was when I was only putting around 150 hours a year on them. I thought they were a decent cutter and definitely got my monies worth at around $1600 for a new one. The Bush Hog 3008 is right around $6500...a lot of money for the extra 2', but I have had this one for 6 years now and probably have 1500 hours on it with no problems. I have another I bought two years ago that I use on another tractor...bought it when I was told they were discontinuing the 3008. Last year I ran over 350 hours on this one, only expense was fuel and $145 for a set of blades. Try that with a flail!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.