Like I said earlier in this thread, I put a Davis 100 series on my MF135. I got it from a guy that took it off his MF30. All of the mounts were exactly the same and it came with all parts including the front mount pump. Even with the mounts being exact, it took 3 attempts to get it mounted. Be patient and think it through. I tried to keep as much of it together as I could and that's why it took 3 attempts with one putting a hole in the radiator. Ended up having to remove mounting brackets, foot rest, etc, etc, etc to make it work. I now have it all together and working good but at the time it was very frustrating. I have about $1,000 in the loader including bucket rebuild and new control valve (hoses are good, cylinders don't leak and pump works well) so it was worth it.
Something you definitely don't want to do is buy a loader that is not meant to fit the MF135 and/or doesn't have the mounting brackets. Unless you are a master fabricator, thinking you will get any loader to fit is a wish. Best bet is to get the 32/34 model that is quick attach and much easier to work with.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Experimental Tractors Article - by Danny Bowes (Dsl). Tractor technology appears to have nearly hit it's pinnacle of development. If you agreed with the subtitle, you are rather mistaken. Quite, actually. As a matter of fact, some of the technology experimented with over 40 years ago makes today's tractor technology seem absolutely stale by comparison. Experimentation, from the most complex assembly to the most simple and mundane component, is as an integral a part of any farm tractor's development
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
