Re: OT.Best way to check flouresant bulbs.

Posted by JMOR on May 25, 2017 at 11:39:00 from (76.186.116.52):

In Reply to: OT.Best way to check flouresant bulbs. posted by Paul Shuler on May 25, 2017 at 11:01:57:

Quoting Removed, click Modern View to seeThis works sometimes on bi-pin bulbs, but if trying to light (flicker) it may not be good indicator. On bi-pin type, you have no doubt seen the small filament on both ends. This has low voltage applied during start up & is heated by the plasma arc during operation. Sometimes at start up you can see that dim glow on both ends if all is well. Sometimes you can feel the tube at each end & if one end is cold, that is likely the bad tube.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]