There's no problem putting steel over wood. Two things to consider first are, is the existing wood secure? Not weak/rotten? If so, the other main thing is to ensure that there is proper air flow so that there is not trapped moisture up against the steel. High moisture would shorten the useful life of your siding. Other than that, should be no problem.
If you think there "might" be a potential moisture issue, you could always run some horizontal nailer strips on the wood, then attach your steel to them. You could use 2x3 or 2x4's, but really should only need 1x's to allow air flow between the existing wood and the new steel.
Lastly, I always recommend using screws rather than nails when dealing with steel roofing/siding. The nails have a tendency to work out some over the years, which can allow for leaks as well as compromising the holding integrity of the fasteners.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The River Tractor - by Charlie English Jr.. This is a 4010 John Deere that was used to farm on the Diamond Island which is in the Ohio River about 15 miles southwest of Evansville, Indiana. About ten years ago, this tractor was parked close to the bank as the river was washing the bank of the island away.
... [Read Article]
Latest Ad:
Wanted to buy model 65 massey ferguson 65 diesel
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
