Posted by Andy R on April 16, 2017 at 17:46:42 from (166.181.83.38):
My Kinze planter has always had the marker disks set so they throw the dirt outward. The blades would be oriented like those on the front gang of a disk. Now I am seeing Kinze planters with the marker disk blades set so the dirt is pulled inward towards the planter to make the mark. Just got to thinking that sometimes the marker disk will bury itself if it hits an ammonia fertilizer slot. A few times I have even seen it push up on the center pivot of the flat fold markers while the marker disk is trying to stay in the ammonia slot. If I would turn the marker blades around it wouldn't push up on the center of the two piece markers since the blade would be pulling outward. Looks simple to change them - loosen four bolts and turn the blade around. Might have to end for end the mounting brackets. Maybe they wouldn't dig so much. The ground last year was soybeans. Planting no-till corn. Advantages or disadvantages????? Thanks.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Winterizin Engines - To Drain or Not to Drain? - by Staff. Another great discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "Winter is fast approaching..for a gas tractor should the gas tank be drained and run the engine til the carb is dry or do the gas stabilizer products I've heard of work? (tractor will not be used til spring) any other tips for winterizing?? "
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
