Posted by massey 333 on March 18, 2017 at 14:16:32 from (209.173.191.171):
In Reply to: Sizing big generator posted by pat sublett on March 17, 2017 at 17:40:40:
Pat,You are doing an Apples to Oranges thing single vs 3 phase gens.,A single Phase Generator puts out what it is rated at,a 3Phase only puts out 2/3s to 3/4s on single phase what it is rated for on 3 phase.a good single phase generator 20KW=83Ampes,25KW=104A &60KW on startup,35KW=146A & 90KW startup,45Kw=188 Ampes &110KW startup loads. In a PTO unit,you can go to 100KW load carrying.To answer your question,I'am running a full farm plus 3HPs(5 ton+ 2 2Ton units )with a25KW unit.I'am looking to go to a 35 or 45 so we can run the grain dryers if needed. 20 or 25KW will fill your bill totally.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Belt Pulley? Really Doing Something? - by Chris Pratt. Belt Pulleys! Most of us conjure up a picture of a massive thresher with a wide belt lazily arching to a tractor 35 feet away throwing a cloud of dust, straw and grain, and while nostalgic, not too practical a method of using our tractors. While this may have been the bread and butter of the belt work in the past (since this is what made the money on many farms), the smaller tasks may have been and still can be its real claim to fame. The thresher would bring in the harvest (and income) once a y
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
