Posted by loucksgl on February 27, 2017 at 09:09:37 from (67.44.209.175):
I know this issue has been beat to death and the fixes are obvious, but I've tried it all and can't stop the leaking bowl. PS: I have owned a BMW Motorcycle shop back in the eighties and have repaired and repaired and repaired but I've not run across anything as diabolically evil as this leaking bowl ever. Its nuts! I sold all my tech tools over the years and can't measure the bowl or the mating surface for distortion. I tried gaskets and O rings for the old assembly and finally gave up. Then I ordered a brand new unit from Yesterday's Tractors and it leaked new out of the box. I bought cork gasket material and methodically cut two perfect gaskets with an exacto knife. Tried the bowl with one gasket and it leaked. Put two gaskets in and the leak started after 60 seconds. No chips out of the edge of the glass bowl. No rough edges on metal mating surface. Screen isn't an issue. Took it out. Are these sediment bowl units junk reproduction or what? I'm ready to push the tractor out in the field under the maple tree. 1953, T0 30 Continental Eng.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Harvestin Hay: The Early Years (Part 2) - by Pat Browning. The summer of 1950 was the start of a new era in farming for our family. I was thirteen, and Kathy (my oldest sister) was seven. At this age, I believed tractor farming was the only way, hot stuff -- and given a chance I probably would have used the tractor, Dad's first, a 1936 Model "A" John Deere, to go bring in the cows! And I think Dad was ready for some automation too. And so it was that we acquired a good, used J. I. Case, wire tie hay baler. In addition to a person to drive th
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.