Posted by ss55 on February 14, 2017 at 10:46:56 from (63.147.218.40):
In Reply to: Concrete block silos posted by Dave H (MI) on February 13, 2017 at 11:57:11:
Fourteen foot diameter isn't a lot of floor space. If you build the new silo can you build it to serve a modern purpose that could add value to your property: tool shed; storage shed; lawn mower storage; feed shed; chicken coop; sheep or goat barn; calf barn; grainery?
Some of the reasons so many obsolete buildings and silos are torn down include: reducing property taxes, reducing insurance costs; clearing the space for other uses; eliminate potential dangers; preparing the property for sale (many potential buyers see obsolete buildings as a liability because it will cost them money to have them removed). I would check with your county tax assessor, insurance agent and a local realtor to find out what the hidden costs of a new silo might be. When it's time to sell the property, it's possible the new silo could hurt your property value.
I do appreciate your later "surprised" post that you don't like unwanted advice. These are simply some of the things I would take into account before building a new silo, they may not apply in your situation.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
