Posted by showcrop on January 23, 2017 at 04:16:43 from (73.238.20.26):
In Reply to: they can get stuck posted by larry@stinescorner on January 22, 2017 at 18:15:50:
Young fella Old's method of chaining a beam to the tracks is the way to do it if you don't want to go through the major production of digging and towing. Many readers perhaps don't know how it is done. It also works using a log or pole, and it works on tractors too. You lay the log or pole or beam crosswise behind the machine up against the tires or tracks. You then pass a chain through the wheels between the rim and center. You then pass each chain around the pole and hook it onto itself. You then just back up and the rear of the machine will lift as it tries to pull the pole under. Warning!! Do not try to drive out forward, and if you need drama, call in big tow machines. This method is boring.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Cockshutt Tractor - by Danny Bowes (Dsl). The son of a very successful Toronto and Brantford, Ontario merchant, and himself quite an entreprenuer, James G. Cockshutt opened a business called the Brantford Plow Works in 1877. In 1882, the business was incorporated to become the Cockshutt Plow Company. Along with quality built equipment, expedious demand and expansion made Cockshutt Plow Works the leader in the tillage tools sector of the farm equipment industry by the 1920's.
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
