Posted by Gene Davis (Ga.) on January 14, 2017 at 07:15:41 from (98.80.184.156):
In Reply to: Todays funny posted by jon f mn on January 14, 2017 at 06:29:59:
My worst time ever was when one Monday morning when I was installing an overhead conveyor track in a factory setting. I came in not feeling too good and was on a ladder about 20' in the air. I had forgotten my gloves and did not want to climb back down and get them,(mistake#1) so I decided since it was just one weld I would do it bare handed,(mistake#2). Struck the arc with the 7016 rod and was doing well with the vertical bead until I smelled something burning. The flux from the 7016 rod had dripped down and gone int the low top shoes (mistake#3). Hence the dilemma. My sock was burning and also beginning to get to my foot and here I was 20' in the air on a ladder, all I could was hang on and work till I got the sock stopped from burning. Needless to say my helper on the floor had a good laugh.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
