Posted by TimV on January 13, 2017 at 17:11:17 from (74.78.234.72):
In Reply to: Oliver Crawler tractor posted by Brent Zappe on January 13, 2017 at 16:21:35:
Oliver made several sizes of crawler tractors from the OC-3 up to the OC-18. The OC-3 was, I believe, essentially a rebadged Cletrac HG after Oliver purchased them, and some of the others were based on wheeled models of Oliver tractors. We have an OC-4 that did all of our snowplowing duties until Gramp bought a 4x4 Ford pickup with a plow in 1988, and then it just did the spots, such as our sugarbush, where the truck couldn't easily get in. They were a handy little crawler for a small dairy farm like ours, and we also used it for working land too wet to get a wheeled tractor on, skidding logs in winter, moving and leveling dirt, and similar chores. It had a hydraulic lift blade with manual angle--you pulled two pins and could move it from roughly 45 degrees left to straight to 45 degrees right. I can't speak to the military versions though it wouldn't surprise me if there were some, as a small crawler is certainly handy to have around in a military setting.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - by Teri Burkholder. The View from the Garage - Never a doubt, everything on our farm is a learning experience. I've been working very hard to get our two rundown Farmall A's sanded, primed , bondo�d, fiberglassed and painted before our big local tractor show called the Tulip Festival. My husband Ben came in the garage one rainy day to see if he could "help". Well if you knew Ben you wouldn't want him anywhere near your spray gun, fiberglass or bondo! So I pulled out the 2 old yucky looking magne
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
