Posted by 4play on December 07, 2016 at 23:20:58 from (68.97.113.64):
In Reply to: Fuel injector cleaning posted by chris english on December 06, 2016 at 15:06:37:
That truck is new enough to have deposit resistant injectors, thats not to say they can still get dirty, just not as likely to happen. Most of the time dirty injectors will have a rough idle accompanied with a stumble on accel and possible hard to start cold. If it runs rough or hesitates when the engine is warmed up I would look at other things first, like sensor readings (temp sensors, oxygen etc), vacuum lines and gaskets for a vacuum leak.
If injectors get to the point that they are dirty and need to be cleaned you have probably passed the point of "fix it in a can". I have flushed injectors on many vehicles with good results using a machine that hooks to the fuel rail using specific chemicals for that purpose. If I tried anything in a can I would look for a product made by BG, it is called "44k". If you can't find that then maybe run a few bottles of Chevron w/Techron. Seafoam can work to an extent but its a little more universal or milder, I consider it as more of a preventative cleaner.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Fordson F Ignition System - by Anthony West. A fellow restorer contacted me earlier this year asking for some help and advice on a model F that he was restoring. He had over a period of months spent a fair amount of his hard earned cash on replacement parts for the old "trembler" ignition. Sadly though all his efforts seemed to be a waste of time and money as he still couldn''t get the temperamental old thing to run correctly!! If i said that this was a little frustrating for him that would be "conservative" in fact the problem had reduce
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
