Posted by Steve@Advance on September 20, 2016 at 18:24:59 from (107.203.134.67):
In Reply to: F134 Jeep Engine posted by Doug - Iowa on September 20, 2016 at 16:45:19:
Might want to go back and recheck the valve clearance. Always a good idea to reset them after initial start up. Be a good time to retorque the head bolts (before setting the lifters).
Could the clacking and popping be an exhaust manifold leak? They can make some strange noises!
When you were working on the distributor, did you check the function of the centrifugal advance, and the vacuum advance (if equipped)?
Is the popping you mention coming from the carb, as in a cough or backfire on acceleration? That can be a sign of too lean or a problem with the accelerator pump. Also check for vacuum leaks.
I wouldn't be too concerned with finding timing marks. Pretty easy to get the timing "close enough" just by trial and error, make small adjustments, take it for a drive. Spark knock, kicking back when trying to start are signs of too much advance. Carb backfire, sluggish performance are evidence of slow timing.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Adding an Hour Meter - by Steven Gussey. This article tells how I added an electric hour meter to my 1942 Farmall H after rebuilding it. I wanted to keep an accurate maintenance schedule for my rebuilt engine and the implements I use with my tractor, but the H was never available with a tach
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
