I have the 46" Husq. that HAD the Kohler Courage 20, now in the dump with a cracked alum. crankcase and half a dozen of the bolts that held the two pieces of the CC together loose, at around 600 hours.....vibrated itself to death. It now has a nice, new, shiny BS V twin, compliments of ebay for about $550 and I have since put 100 hrs on it.
On the mower itself, great machine. I put ATV tires on it and I can mow my 30 degree pond banks easily (without slipping and sliding) and now he 2+ inch cracks in my place don't jar me off the seat. I added a couple of soft springs off the current edition of Cub Cadet riders and that plus less than 10# of air in the tires really makes for a back saving smooth ride.
One thing I really like about the 46 is that it only has 2 blades and the deck is shaped to favor the exhaust with a smooth, high, and wide discharge which makes cutting wet grass in the morning when it's cool a real pleasure....no clogging like on my 3 blade fabricated decks.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - 1952 Ferguson TO30 Restoration Story - by Mike Mc Andrews. I have been planning for many years to build a home and in preparation for this, I decided that I should have a tractor to prepare a driveway, do landscaping and haul material on my acre of land. I have a Cub Cadet for tilling and mowing but I decided that I needed something larger and with a loader. I enjoy repairing things and I like to save some money so I purchaced a 1952 Ferguson TO-30 with a Wagner loader.
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
