Posted by Paul Shuler on May 10, 2016 at 10:41:57 from (170.29.1.10):
I have one of those remaining oil life monitoring systems on my 08 Duramax. I changed my oil on 1-29-16 and noted a few weeks ago that I had about 45% oil life left. I thought that to be about right. Then yesterday it popped up a warning change engine oil soon! I checked and it said no oil life left. I have never had it do that before. I change it most of the time when it gets around 30%. I thought that was awfully fast for it to go to 0%. Almost no highway driving on this change or towing. I had gone about 2,900 miles. I usually get around 6,000 miles between changes going by what the sensor tells me. I changed it of course to be on the safe side. Didn�t know if anyone else has had the same experience. Part two. Every time I change the oil it bothers me that the front of the pan is a good 1 1/2 lower than the back of the pan where the plug is. No way to get all the old oil out. I would guess maybe a 1/2 qt of the old oil stays in. Seems like a bad design. I will try and attach a photo of the pan. It�s not mine but one I found on the net.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Field Marshall Tractor - by Anthony West. Any restorer who has some knowledge of turn of the century farm machinery, will recognize the name Lanz Bulldog!! This machine was to say the least unusual in its appearance. The huge flywheel and coffee percolator shaped exhaust. Along with square body lines and cylinder head protruding forward of the front axle. Would become the visual differentiation that people would quote to separate the Lanz from other period machines. The Marshall company based at the Briannia Works in Gainsborough
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
