Re: JD B Generator Regulator

Posted by MDFJ on April 03, 2016 at 20:58:24 from (50.203.99.102):

In Reply to: JD B Generator Regulator posted by MDFJ on April 03, 2016 at 17:33:06:

Thank You All,

I have been A Heavy Gen./Refer/ Diesel Mech. For 37 Years.

I know if a 12 V. Neg. Gnd. Baler is hooked to the hitch of the tractor, And the tractor is Pos. Gnd. And left over night you will have a problem.

I Understand Elect., Hyd, Refer, Etc. I know that dissimilar metals,Are like a wood on wood drawer slide. They have to be different.Pine/Oak, Maple/pine,etc. Or they wear out and fall apart. My Father is a Master carpenter (85 Years,Still has all 10 fingers). I learned allot from him, It's just dumb things like this that can stump a person! Especially when the parts today. That are not made in U.S. Or Not made to Specs. Like they were before!

I will check out all of your suggestions!!

Thank You All Again!!

MDFJ

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]