Posted by RayBarry on March 25, 2016 at 03:03:51 from (41.247.248.147):
Good Day from South Africa. :D
I have a MF 135 to which I installed a re-built engine.
The engine [ADE 152 perkins diesel] had been standing for a number of years [5?], but after bleeding the fuel system, she fired up easily. Had to tweek the injector pump. All was well, except the oil pressure - went straight into the high red zone. Changed the guage but the problem is oil pressure - too high.
Ran the tractor - cutting grass - for an hour thinking that this might settle the pressure, but no luck.
OIL LEAKED FROM THE BELL HOUSING AND THE TAPPET COVER. LOTS OF IT.
A few questions. :shock:
If the engine has been standing un-used for these years - what may have blocked or siezed?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
