Posted by Determined on December 28, 2015 at 11:44:35 from (216.130.212.81):
In Reply to: 3.7 engine temp help posted by old560 on December 28, 2015 at 06:46:48:
Quoting Removed, click Modern View to see
Gauge and heater temp output sound like they are moving parallel so we can rule out a faulty gauge or sending unit.
Low coolant level would be possible cause of low heat when accelerating hard up a hill. The higher RPM combined with the increased angle can lower the level of coolant thus starving flow to the heater core, the level in intake coolant passage may drop lower than the sending unit thus giving a false reading,
Low coolant.
Stuck thermostat.
Upside down thermostat.
Defective thermostat.
Fan clutch issue.
Not much else in the equation, start with double checking the coolant level.
If you are sure the fan clutch is good your next step would be go back to the basics.
Pull the thermostat, put it and a thermometer in a pot of water on the stove and verify the temperature it is opening and closing at.
A proper functioning thermostat is there to keep your engine warm just as much as it is there to keep it cool.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - Tractor Engine Repair - by Teri Burkholder. One of the great things about working on a tractor engine with your other half is that you know what he is thinking of at all times and can anticipate his every move and his next thought of what he will do. With Ben, anyway, I can tell! He'll be busy working and I�m handing him tools and he says, "give me that..." and I�ve already got it in his hand or "hand me that....."and I�ve got the portable light right where he needed it placed to see. "Run in the house and get me a...."as I open th
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
