CenTex, relax. In the grand scheme of things, all plumbing projects average out. I recently spent a good part of 4 days replacing a failed pressure tank and a kludge of pvc/cpvc water piping with leaky valves in the cellar with about 31' of copper and quarter turn valves. While at it, I replaced the kitchen and bathroom faucets and a leaky seal in the tub faucet. Got done and only one leak from a faucet riser connection that needed another eighth turn.
I managed to keep part of the cold water on most of the time to the barn and the house cold on occasion with a washing machine supply hose from the pressure tank T with shark-bite fitting on one or another stub of pipe. I lost count of times going back to town for another handful of fittings, or at the end, another length of pipe to finish the last connection. As I was in the store one of those trips, another fellow wandered by muttering "#%@, I hate plumbing". I knew better than to say anything, lest I get to hear just how bad his project is.
There's a reason I don't do plumbing for a living, and another reason "real" plumbers can and do charge what they do: 98 times out of 100, it sucks.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Mud Daubers and the Old John Deere - by Jon Zehnder. I have a 1941, John Deere Model A tractor I have owned for about a year and a half. This is my first (in case my wife reads this, "FIRST") tractor and it has been a learning experience. After considerable advise and assistance from local tractor nuts and the forums of Yesterday�s Tractors, I had finally got it running pretty well. I have tuned it up, overhauled the carburetor, installed a borrowed, rebuilt magneto, installed a new Power-Trol, patched the radiator, installed new front wheels a
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
