Posted by kevinstuff on November 24, 2015 at 07:42:58 from (166.181.81.171):
In Reply to: Worst Job posted by Married2Allis on November 24, 2015 at 06:29:03:
Back in the 70's I worked at the International Harvester foundry in Waukesha WI , the conveyors that carried the sand from the molds that were shaken out kept filling up the basement with sand and had to shovel sand that collected in this small space back onto the conveyor which was about 3 feet from floor , all while the conveyor was running creating thick dust and no fresh air at all , the dust would cake into your skin where ever u we're sweating . This by far the worst job ever . To this day I have no interest In any thing with the IH badge. I used to pour steel at 2900 degrees from a 7 ton ladle with open crane and I had travel short distance with the ladle under cab of crane , if u stuck you shoes out past floor of cab they would catch on fire. and on most summer days it was well over 100 degree . that foundry was owned by Tenneco , it's now a pile of rubble with 1 building left where the crane was . Glad them days over
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fasteners: The Nuts and Bolts of Nuts and Bolts - by Curtis Von Fange. The nuts and bolts of nuts and bolts is an interesting and essential piece of knowledge that applies to our older tractors. An improperly torqued capscrew on an engine head or a shear bolt that is too hard on the driving shaft of a bushog can create havoc and make an expensive and uncalled for repair. Let�s examine the purpose and design of these fasteners in order to ensure their proper use. Fasteners are probably one of the aspects of mechanics that is given the least amount of thought.
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
