Posted by fixerupper on September 22, 2015 at 08:53:25 from (100.42.82.100):
In Reply to: O/T 79 Dodge tranny posted by fixerupper on September 21, 2015 at 10:47:52:
OK, I dug around in the glove box a little farther and found a tranny number on the delivery sheet. I bought this thing new and this stuff has never left the glove box. The tranny number is either NP4458 or NP445B. I'm leaning toward NP445B. It's hard to read a yellowed wrinkled 36 year old piece of paper. When the tranny went out the first time I got lazy and had a local mechanic replace it for me. He had a heck of a time finding this one. It came out of California and I am in Iowa so there must not be many around. He claimed it is more of a truck transmission than a pickup transmission.
This is not an overdrive transmission, the engine revs at darned near 3000 RPM's at 60 MPH but maybe this should be the time to look for an overdrive tranny if it will hold up. I don't pull with this pickup anymore.
Here's the build sheet
This post was edited by fixerupper at 09:01:39 09/22/15 2 times.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
