Posted by Bryce Frazier on August 22, 2015 at 21:05:08 from (67.142.182.23):
Hey guys!! Need a few parts...
Biggest thing is a correct manifold/exaust pipe for a 41 B..
Here is what happened. I bought a head (which turned out to be off of a 48+ B). We didn't realize that it was a newer one until AFTER we re-maned it.... (oops..)
Several people have told us that it will work, and after checking out and updated parts book, and talking to JD, yes, the head I have WILL work, however the manifold and pipe don't work with the tractor. The manifold will fit just fine, but then the pipe is WAY wrong. So, what are my options here? Besides a custom pipe...
Other than that, I need the 2 acorn nuts that hold the valve cover on. I need a set of rockers. Some head nuts and compression washers (nuts may or may not be anything special??)
Need a 3 way fuel valve. Fuel lines.
And a few other little things that I have already forgotten...
If anyone has any or all of these parts, give me a hollar!
Also, if anyone is looking for and B parts, I have a LOT of extra odds and ends for B's....
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Hitches For Your Old Tractor - by Chris Pratt. For this article, we are going to make the irrational and unlikely assumption that you purchased an older tractor that is in tip top shape and needs no immediate repairs other than an oil change and a good bath. To the newcomer planning to restore the machine, this means you have everything you need for the moment (something to sit in the shop and just look at for awhile while you read the books). To the newcomer that wants to get out and use the machine for field work, you may have already hit a major roadblock. That is the dreaded "proprietary hitch". With the exception of the
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
