Posted by buickanddeere on August 22, 2015 at 09:10:02 from (184.151.36.202):
In Reply to: Engine oil temperature posted by J. Schwiebert on August 20, 2015 at 18:14:03:
The primary issue to avoid in liquid cooled engines . Is avoiding significant nucleate boiling, steam pockets or voids where the inside of the cooling jacket is exposed to steam instead of water .
How hot does a liquid cooled engine operate with 1/8" of scale and oily crud insulating the engine casting from the coolant. While the operator blissfully looks at a 190F coolant gauge . As the paint burns off the head and top of the block.
A 50/50 coolant mix at 15psi, no oil mixed with the coolant and a temperature gauge reading of 240F would have a "cooler" engine .
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Removin Broken Bolts - by Staff. Another great discussion from the Tool Talk Discussion Forum. The discussion started out with the following post: " How would I remove a bolt thats broken off in a piece of metal and I want to save the treads in the metal and then put in a new bolt. "
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
