Posted by Indiana Ken on August 12, 2015 at 08:16:03 from (67.163.32.18):
In Reply to: Compression Ratio posted by Moondoggie on August 12, 2015 at 07:28:59:
Quoting Removed, click Modern View to see
Compression ratio (CR) is defined as; the volume at bottom dead center (BDC) divided by the volume at top dead center (TDC). CR is based on volumes and does not translate directly to pressure, since compression does not begin until the valves are closed. For this reason, refer to the manual for the engine cranking compression pressure in PSI.
Note: At BDC the total volume is the cylinder volume ((3.14 x bore x bore / 4) x stroke), or swept volume (Vs) + the combustion chamber volume or clearance volume (Vc).
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Generators - by Chris Pratt. As a companion to the articles on three-brush and two-brush generators, it seemed fitting that we should provide our readers with a description of how a generator works in lay terms. The difficulty with all those "theory of operation" texts is that they border on principles of electricity or physics and such. Since I know nothing of either, you will have to put up with looking at the common sense side of how generators work which means we "
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
