Posted by notjustair on August 08, 2015 at 08:06:43 from (70.195.1.104):
In Reply to: Cleaning your shop posted by Rick Kr on August 07, 2015 at 21:01:34:
I do pretty well, but there's a pattern. In the north shed where everything gets parked the walls have become a catch-all. Since its tractors and trucks driving in and out there is always a foot or two at the wall to "lean that until I find a spot for it". The other day I pulled the feed wagon out and cleaned it up so I went through its little corner of paradise. I had a pickup full of block wood that had been leaned lots of places. Well, the tire on the disk started to go low so I put 4x4s under it so it wouldn't sit on the rim, etc. sheesh. There was enough cribbing to either start a really big fire or build several really short houses.
The machine shed where I do repairs also doubles as the "garage" for the good pickup and three classic cars. It has to be kept neat so that I can drive things in and out easily. Tractors and big machinery have to come in and out as needed for repairs. I also have some heavy things in the second story area that I don't often use, so I have to be able to pull a loader tractor in there and get things down. I have to have my tools picked up, BUT it makes me crazy if I walk away from a repair for the night and come back the next day and all of the tools I used to take it apart aren't still there. I need them to get it back together! If it is a long term situation that's different.
It makes me nuts to trip over mowers and tillers. They are in the machine shed now and I hate it. They have been parked in every shed on this farm and I still haven't found them a home. They may just get their very own new building. It would help if I didn't have three tillers, five riders, and three push mowers. Each has its specidfic forte, so I guess they all stay.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Field Modifications (Sins of the Farmer) - by Staff. Picture a new Chevrolet driving down the street without it's grill, right fender and trunk lid. Imagine a crude hole made in the hood to accommodate a new taller air cleaner, the fender wells cut away to make way for larger tires, and half of a sliding glass door used to replace the windshield. Top that off with an old set of '36 Ford headlight shells bolted to the hood. Pretty unlikely for a car... but for a tractor, this is pretty normal. It seems that more often than not they a
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
