Re: Field Fence mending

Posted by caterpillar guy on July 31, 2015 at 17:35:00 from (75.134.175.12):

In Reply to: Field Fence mending posted by Lamont in NC on July 31, 2015 at 13:04:03:

We would just either pull the corner up some so the top is tight or pull the end till it is tight. We usually put in a corner post then with the woven wire around the side of another post just push or pull that post towards the corner post this will stretch both directions at once. Then shorten the cables holding it to the corner post. Or if it is by the end we would just pull the end and shorten the cables holding the end to the corner post. We do not wrap the wire around the post and hook it back to the wire,except for barbed wire.

Replies:

Add a Reply! You must be Logged In to Post Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial No List  Return to Post  Upload Photos/Videos Choose Files from your local computer Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]