2 days sounds pretty quick - even with a haybine/crimper unless you are in the hotter/drier west.
If everything was perfect - I'd cut with a sickle bar mower (what I have), which lays the grass out very flat, at the highest setting it will cut - to maximize the stubble height. I let that set for a day, ted after the dew burns off the 2nd day, 3rd day, be ready to bale, but more likely ted again, 4th day, rake and bale. One of the reasons I'm interested in a mower/conditioner is for the crimping action and potential time savings that go with it. 3 days from cut to bale in the mountains of VA would be awesome. What I don't like about the mower conditioners and drum mowers is - it appears to me, they lay a windrow to some extent and I'd think you'd have to ted right away. The sickle mower lays the hay our very nicely and flat - maybe a few clumps along the swath board at the end of the bar.
I will say this - I was AMAZED at how the tedder accelerated the drying of our hay. The drying was to the point that some of my hay appeared to be to dry and straw looking. I'm a believer - tedders work.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Threshin Demonstration - by Michael Delaney. Introduction I bring you greetings from Prince Edward Island, Canada. We are Canada�s smallest province but big on farming. Maybe you�ve heard of us. Potatoes are our biggest crop. However, there is lots of mixed farming here also. I have a small mixed farm with 25-30 cattle. I make very good use of old machinery. I have a 135 MF Diesel, Farmall H and 1/3 share in an Allis B. I have complete lines of tillage and harvest equipment, and a saw gear etc. I have everything one would
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
