Re: Re: Steering on 1450 Cub Cadet
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Todd Markle on August 22, 1998 at 15:42:49:
In Reply to: Re: Steering on 1450 Cub Cadet posted by Bill on August 21, 1998 at 18:37:54:
: : I have a 1450 Cub Cadet that has a lot of play in the steering can that be taken out ? : Your steering gear may have wear and can be adjusted
: by loosing the jam nut which is about 13/16 and turning
: the screw inward with a screw driver. There should
: be a hole in the left sid of the frame near the pedal.
: This adjustment should take all of the play out of
: the steering gear. Do not over tighten, keep steering
: gear free. The tie rod ends need to be checked also. : Good Luck,
: Bill Check the plug in the bottom of the steering gear
to make sure it is tight. If there is any up and down play in the steering wheel, this plug needs tightened or the bearings need replaced.
Follow Ups:
Post a Followup
|
