Posted by fixerupper on April 10, 2015 at 17:54:59 from (100.42.82.100):
In Reply to: broadcasting oats posted by Brian806 on April 10, 2015 at 15:05:45:
I've been around a drill only a handful of times in my life and I've been on an Iowa farm for 64 years. In my neck of the woods very few farmers had a drill because we have never had enough acres of small grain to justify one. That and the old drills just didn't work well in our heavy damp soil. The new drills are a whole different ball game and can do an excellent job in our soils.
We always broadcast three bushels per acre and then lightly disked them in. I've never had very good luck with just dragging and rolling oats in. Too shallow is worse than too deep with oats. They will come up from a pretty darned deep depth. Following the disk with a roller won't hurt a bit.
That said, a drill still gives you a more consistent stand and if you can get hold of one use it. 2 1/2 bushels per acre works well with a drill and gives you about the same stand as 3 bushels per acre broadcast. It's not the end of the world if you broadcast, you just need to make an extra trip across the field and you will use a little more seed.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A 1937 John Deere Unstuck - by Gary Hickman. Here is my story of how I got the pistons out of a 1937 JD B that the engine had been stuck for about 14 years: About 12 years ago my Dad gave me one of the tractors I ran as I was growing up on our farm in central Nebraska. The engine on this tractor, a 1937 John Deere "B", had been stuck for 2 years before he gave it to me. This last spring (1999) I hauled the tractor to our 2 acre lot in St. Libory Nebraska where it joined my antique machinery collection, at that time a 1929 Caterpillar T
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
