Posted by Janicholson on April 02, 2015 at 15:15:53 from (63.152.217.35):
In Reply to: Amp gauge wiring posted by rrlund on April 02, 2015 at 13:12:48:
The diagram has issues. Your tractor seems to have a voltage regulator. From the VR to the Generator should be a F wire from F to F. 12 gauge works. From D to D is 10 gauge. From the regulator output terminal, a 10 gauge wire should go to a Fuse link (about 35 amp) from the fuse link (or heavy fues in holder) the 10 gauge goes to the the amp gauge. At that terminal of the amp gaugea wire goes to the lights and other accessories (12ga). from the other amp gauge terminal a 10ga. wire goes to the starter relay (solenoid) and attaches to the big terminal connected to the battery cable. If it is an alternator with regulator same answer. If alternator, with internal regulator skip the regulator info, and go from D to fuse link. Jim
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Cockshutt Tractor - by Danny Bowes (Dsl). The son of a very successful Toronto and Brantford, Ontario merchant, and himself quite an entreprenuer, James G. Cockshutt opened a business called the Brantford Plow Works in 1877. In 1882, the business was incorporated to become the Cockshutt Plow Company. Along with quality built equipment, expedious demand and expansion made Cockshutt Plow Works the leader in the tillage tools sector of the farm equipment industry by the 1920's.
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
