Posted by Geo-TH,In on February 21, 2015 at 05:34:34 from (184.16.165.4):
I finally got enough snow to test my redneck snow plow out. I couldn't ask for a better design. I have a 7 ft back blade on Jubilee. Have to chain up. Have a slag pipe on back blade. It will still remove rocks from drive. I have used a blade on front loader, same problem, remove grave. No blade can do what this blade can. I can push snow off gravel on to the grass, without disturbing a rock or a blade of grass. This blade is connected to a 6 ft woods belly mower. The mower deck is designed to follow the couture of yard. The snow blade does the same. It's light enough not to dig in, floats.
The other thing I like, no chains required, no ballast in tires, only 4 bolts to install. Some day I may use materials other than wood and 4 inch pvc. You can't beat the design. No front blade or back blade can float, one corner will dig in if ground isn't prefectly level.
I'm working on a design to make a back blade float. The design is still floating around in my head. That's project for another day.
So far, this is the best snow plow yet. AND I WON'T HAVE ROCKS TO REMOVE FROM THE YARD COME SPRING.
I also discovered you can start a Farmall c using 12v 235 cca lawn mower battery and not slam the 6 v starter.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Oliver 550 Clutch Overhaul Tips - by Greg Sheppard. I got my 1964 Oliver Model 550 (serial 141-139-519) second-hand and used it for several years before the clutch began to slip. After taking up the pedal linkage several times I saw it was going to take more than that. The engine had been leaking oil at the rear seal and I suspected
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
