Posted by Centex Farmall on January 24, 2015 at 22:27:52 from (72.105.166.230):
In Reply to: Re: IH and JD tractors. posted by Bryce Frazier on January 24, 2015 at 18:46:18:
It's easy to set up the belly pump on an H/M for a two-way cylinder. You only have pressure on one side but it works fine for a disc or any heavy thing that doesn't require down pressure beyond its own weight. The pumps are simple and very robust. They run off the front of the countershaft in the transmission. The pump runs any time the clutch is engaged but only builds pressure when you pull the rod back.
As you've noticed, the small farmalls got the live hyd. first in the late 40's. The H/M size not until '53 with the "Stage 2" Super M/H. Even then the belly pump was still an option but most you find had the live hyd.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - History of the Nuffield Tractor - by Anthony West. The Nuffield tractor story started in early 1945. The British government still reeling from the effects of the war on the economy, approached the Nuffield organization to see if they would design and build an "ALL NEW" British built wheeled tractor, suitable for both British and world farming.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
