Posted by tritowns on January 16, 2015 at 06:09:26 from (162.251.197.122):
In Reply to: gasified Case 310 posted by tritowns on January 13, 2015 at 05:46:18:
Sorry for not getting back here sooner.
This is my design, base on my friend Stephen Abadess' work.
I guess you could call it a modified Imbert, but only because it has nozzles.
The unit is designed to work on chipped wood, pellets of small blocks.
I really should have made the hopper larger as it only gets about 3/4 an hour on a load (soft wood chips, hard wood or denser fuel would give longer run times)
Compact gasifier 39� x 15�
Removable hot plate restriction
New co-axial double pass air preheat
Replaceable nozzles
Monorator hopper with removable swirl liner
Easy open, low pressure puff up lid
No shake adjustable grate
High capacity cooler/condenser
New cooler/final filter with 100% wool blanker final filter media
These are our current system specs... AS we build these for sale I really can't talk about things that are proprietary to our unit. that being said, if you had questions I'd do my best to help you with answers where I can.
This isn't my first tractor, i did a John Deere M for a fellow is southern Ontario. And have two more tractors and a stand alone system in the works.
I have some videos on youtube... you can look them up under industrial supply, or wood gas tractor project.
Please like and share as I'd appreciate that a lot.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Storing Your Tractor - by Staff. If your tractor is going to be stored for any length of time, a few precautionary measures are helpful in preserving various parts, also in avoiding future difficulty. Store tractor under cover. If impossible to place tractor under cover, be sure to cover air stack and exhaust pipe. Drain radiator and engine block. To avoid gum content collections, drain both fuel tanks and carburetor. Leave radiator and fuel caps slightly loose to protect gaskets. Block tractor up to remove weight from tires and to keep tires from contact with moist floor.
... [Read Article]
Latest Ad:
Looking for a minneapolis moline zts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
