Posted by sotxbill on January 12, 2015 at 08:02:24 from (104.5.24.112):
In Reply to: blow by posted by amstrad on January 12, 2015 at 06:04:29:
my recommendation is
Change to a hd 15w-40 motor oil.. It will have additives to clean the rings, and lower blowby. If the tractor improves after a bit, keep changing the oil every 300 hours.
Best place to get it.. wally world or any parts store or truck stop.
chevron delo, mobile delvac, Shell rotella, mystic, and others are examples of hd diesel oils.
Other wise from the old days when I was young and dumb.. pour one QUART of stp oil treatment in with 3 quarts of hd oil. STP was originally made by the studebaker packard company to help reduce blowby.. its a temporary patch at best,, But I limped along for years using it.. I would pulling to a filling station and fill the oil and check the gas. But that was the high school days when I changed engines almost yearly. Always bigger and faster, always racing the crap out of old iron.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
